POKETONE Polymer M33AG6A
POKETONE Thermoplastic Polymers are
aliphatic polyketones, a revolutionary new
class of semi-crystalline thermoplastics.
Hyosung developed new catalyst to produce
this unique polymer in 2013 and constructed
commercial plant in 2015, in Ulsan, Korea.
POKETONE Polymer M33AG6A is a 30
percent short glass-fiber-reinforced high-flow
injection moulding grade with mechanical
properties that classify it as an engineering
thermoplastic. This grade shows a unique
balance of toughness and high modulus
combined with good creep performance,
strength and elevated temperature performance.
This grade exhibits very good processability,
good impact resistance, high resilience and
good creep performance. POKETONE
Polymer M33AG6A can also withstand
short-term exposure to elevated temperatures.
Moreover this polymer exhibits high
resistance to hydrocarbons, solvents, salt
solutions, weak acids and weak bases.
POKETONE Polymer M33AG6A is a
high-flow, low-viscosity polymer that should
be considered for mouldings with long flow
paths or thin walls. This grade is very easy to
process on standrad injection moulding
equipment. Cycle times are generally short
and parts show good mould definition.
POKETONE Polymer’s low moisuture
sensitivity means that no conditioning of parts
before assembly or use is necessary.
Applications for POKETONE Polymer
M33AG6A may be found in the automotive,
electrical, electronics, undustrial and consumer
applicance markets.
